Produse pentru echipamente laborator (363)

The FTIR spectrometer ALPHA II combines outstanding quality with a small footprint and sets a benchmark in terms of user convenience. With the integrated panel PC and the touch-based operation, FTIR spectroscopy has never been easier. The ALPHA II features a new way to operate an FTIR spectrometer. With the integrated panel PC and the dedicated OPUS-TOUCH user interface it takes only three touches for measurement, evaluation and report generation. OPUS-TOUCH is very intuitive and guides you conveniently through the measurement and evaluation process. Alternatively the ALPHA II can also be operated with an external PC.

Thermogravimetric analysis (TG) follows changes in mass of the sample as a function of temperature and/or time. TG gives characteristic information about the composition of the measured sample, in particular the amounts of the various components and their thermal behavior. In addition, further measurements are possible such as kinetic analysis of thermal decomposition. The identification of gases released directly from the sample or during thermal treatment cannot be performed just by thermal analysis, but coupling a spectroscopic method such as Fourier-Transform-Infrared (FTIR) spectroscopy is an excellent solution. IR spectroscopy is a classical technique, which depends upon the interaction of infrared radiation with the vibrating dipole moments of molecules. It gives, with the exception of homonuclear diatomics and noble gases, a characteristic spectrum for each substance.

SiBrickScan (SBS) is a dedicated at-line system for the FTIR quantification of interstitial Oxygen in complete Silicon ingots, resulting in a concentration profile along the longitudinal axis. Accessing this information without sawing wafers or test samples is a major and cost saving advantage. Get Valuable Information to Check and Optimize Product Quality Knowing the Oxygen gradient of Si ingots enables important conclusions helping e.g. to control and optimize the Silicon crystallization process or to identify batches of bad raw material. Therefore SBS will help to save costs by optimizing product quality and reducing the amount of defective wafers. The random sampling of individual ingots does strongly reduce sample preparation efforts and provides relevant information much earlier.

MATRIX-MF is a rugged and a compact spectrometer that can be fiber optically coupled to measure chemical reactions in laboratory and/or process environments. Bruker's MATRIX-MF FTIR spectrometer expands the proven MATRIX series product line utilizing the information rich mid-IR region for use in both laboratory and process environments. The MATRIX-MF is a process ready FTIR spectrometer that is ideal for real-time monitoring and analysis of chemical and biological reactions.

Innovative, powerful and easy to operate, this and more is BRAVO the handheld Raman spectrometer from Bruker. BRAVO relies on the proven Bruker combination of innovation and quality and combines latest technologies for an unparalleled performance. The patented fluorescence mitigation using Sequentially Shifted Excitation (SSE™) enables the measurement of a much wider range of materials than ever before using handheld Raman spectrometers. Duo LASER™ excitation with two lasers offers the highest sensitivity in a large spectral range from 300 cm-1 to 3200 cm-1 including the CH-stretching vibrations. Furthermore, BRAVO supports the most efficient and clearly laid-out workflow on a large 7 inch touch screen display. This and many more form the basis of a unique product especially designed for raw material verification of finished products in the pharmaceutical industry.

The SENTERRA II defines a new level of spectroscopic performance and user friendliness in the class of compact Raman microscopes. SENTERRA II is designed to deliver excellent sensitivity combined with high spectral and imaging performance. Therefore the SENTERRA II is a powerful platform for advanced research applications. Due to its high degree of automation, compact size and efficient workflow the SENTERRA II is likewise an ideal tool for solving real world tasks in the quality control laboratory. Its unprecedented permanent stability of the wavenumber axis guarantees precise and accurate results at every time. The SENTERRA II is THE Raman microscope for both, the multi-user environment with high daily throughput and for the lab working at the forefront of scientific research.

The intuitive, easy-to-use OPUS software controls all data collection and manipulation functions for the MultiRAM. The real-time spectrum display permits software control of the analysis conditions, including optimization of the laser power and the sample position. High Performance Combine advanced digital electronics with Bruker Optics’ high quality optics and you have the ultimate in a high performance FT-Raman system. The heart of the MultiRAM is Bruker Optics’ patented interferometer with gold coated optics and permanent RockSolid alignment, which provides the superb stability and throughput required for demanding emission experiments.

The award winning MATRIX-F II FT-NIR spectrometer allows the direct measurement in process reactors and pipelines, leading to a better understanding and control of the process. Accurate in-line results in seconds Multiple components per measurement Non-destructive analysis Optional built-in 6-port multiplexer Direct method transfer Rugged design Ethernet connectivity and industry standard communication protocols

FTIR Excellence for Industry, R&D and Science: INVENIO INVENIO is the definitive spectroscopic solution for routine FTIR analysis as well as research and development. It is all you need and so much more: innovative technologies, intelligent design and its new beam path contribute to an unrivalled user experience. Your advantage: •Outstanding signal-to-noise ratio •Broad spectral range (FIR, MIR, NIR and VIS/UV) •Touch-PC with dedicated software for enhanced productivity •MultiTect™: Up to seven automated and software controlled internal detectors •Transit™: parallel availability of two experimental setups •RockSolid™: reliable, well-proven and precise •CenterGlow™ IR source: optimized light flux and durability •Bruker FM: MIR and FIR spectra in one go •Upgradability: retrofit spectral range extensions or time resolved measurements •Multiple beam inputs and outputs •Compact footprint optimized for laboratory benches

The LUMOS II offers outstanding visual and spectral data quality with full automation of all measurement modes: transmission, reflection and ATR. For FTIR beginners and experts alike, the LUMOS II is the best solution for infrared microscopy. Bruker's exclusive Focal Plane Array (FPA) detector technology allows you to experience detailed imaging at the maximum speed. This allows you to take full advantage of the vast possibilities offered by FT-IR microscopy. The OPUS IR software provides you with assistance whenever you need it and allows you to glide effortlessly through measurement, evaluation and reporting. Your advantages: • Extremely fast FT-IR imaging (FPA) • High spectral quality and resolution • Brilliant visual images and huge field of view • Fully automated FT-IR microscope • Integrated, piezo-controlled ATR crystal • Software supported measurement and evaluation • Automatic measurement in transmission, reflection and ATR

The IFS 125HR is the ultimate instrument for the high resolution IR spectroscopy Outstanding results in your laboratory In absorption or emission mode, the IFS 125HR can resolve highly complex spectra into discrete lines for recognition and spectral assignment. Outstanding resolution across the entire spectrum Resolved linewidths of < 0.0009cm -1 Broad spectral range: from 5cm -1 in the far-IR to >50,000cm -1 in the UV Double-sided interferogram acquisition (option) Symmetric line shapes - due to high precision optics Easy range change - every experiment can access different sources and detectors without breaking vacuum. A total of 4 sources and 6 detectors can be accessed through each of two different sample compartments

Pharma design - Series V 300 - 500 TP The HEINKEL Pilot Plant Vertical centrifuges are characterized by a mobile compact design and easy installation for use in the laboratory and pilot plant. The centrifuge is specially designed for cGMP requirements in the pharmaceutical industry. Special properties for the benefit of the customer: Mobile, compact design Very simple installation “plug and use” application Ideal for “up scaling” Very simple to operate CIP cleaning For installation within isolators/glove boxes

The HYPERION II microscope combines FT-IR and infrared laser imaging (ILIM) microscopy in a single instrument for the first time. It offers all three measurement modes: transmission, reflection and ATR. Now, users have the unique opportunity to use an IR microscope that offers both, the reliability and precision of FT-IR and the tremendous speed advantage of IR laser imaging, all in one.

10 cm optical path length for the identification and quantification of high gas concentrations Volume inside the gas cell is 25 ml only PTFE coating of the gas cell enables the measurement even of corrosive gases Accounts for variable pressure and temperature of the gas by sensors The MATRIX-MG01 features a gas cell with 10 cm optical path length and is especially well suited for the quantification of gas compounds with very high concentration. The cell has a volume of 25 ml only to enable a fast gas exchange with minimum gas consumption. Its PTFE coating and ZnSe windows ensure a maximum corrosive protection. The MATRIX-MG01 is equipped with temperature and pressure sensors and their measurement values are automatically read out and considered within the control software OPUS GA.

The VERTEX FTIR research spectrometer productline is the culmination of everything Bruker has pioneered and developed in over 40 years. The VERTEX Series is built on a fully upgradeable optics platform that is designed with the utmost flexibility in mind. VERTEX spectrometers share a wide range of features, including an intelligent network for automation, Automatic Component Recognition (ACR), the Plug &amp; Play Ethernet connection and Automatic Accessory Recognition (AAR). VERTEX 70v Bruker's VERTEX 70v FTIR Spectrometer is based on the well-known RockSolid™ interferometer and the ideal entry level systems for Advanced Research applications. The vacuum optics bench provides class leading specifications. VERTEX 80/80v The high-end VERTEX 80 and the VERTEX 80v vacuum FTIR spectrometers are based on the actively aligned UltraScan™ interferometer, which provides PEAK spectral resolution and highest scanning speed.

Chemical Design - Series H 500 - 630 C The wide selection of HEINKEL Pilot Plant centrifuge types with their different basket diameters allows for a solution to the separation task in every application. These machines can be flexibly operated in small production plants because of their design. HEINKEL fulfills the requirements for manufacturing quality, acceptance and documentation for chemical plants. Special properties for the benefit of the customer: Compact design Optional design as tabletop Very simple installation “plug and use” application Ideal for “upscaling” Fully automatic operation

Chemical Design - Series V 300 - 500 TC The HEINKEL Pilot Plant Vertical centrifuges are characterized by a mobile compact design and easy installation for use in the laboratory and pilot plant. The centrifuge is specially designed for cGMP requirements in the chemical industry. Special properties for the benefit of the customer: Mobile, compact design Very simple installation “plug and use” application Ideal for “upscaling” Jacketed to heat up and cool down Baskets for basic tests for filtration, sedimentation and classifying

Umlaufkühler für professionelle Anwendungen. Hochgenaue Kühlung für Prozesse und analytische Gerät. Spart Platz, Energie und Leitungswasser. Bietet mehr Leistung, Sicherheit & Benutzerfreundlichkeit.

Umlaufkühler für professionelle Anwendungen. Hochgenaue Kühlung für Prozesse und analytische Geräte. Kompakt und leistungsstark. Leise und energiesparend. Optimal für die Aufstellung direkt am Arbeit

Meßeinrichtung zur Erfassung des Wasserhaushaltes und der Abflüsse von Großlysimetern. Langzeitüberwachung der Abdicht- oder Rekultivierungsmaßnahmen (Reduktion der Sickerwassermenge) z.B. in Deponien

Umlaufkühler für professionelle Anwendungen. Hochgenaue Kühlung für Prozesse und analytische Geräte. Energiesparend, leise, benutzerfeundlich und ein echter Hingucker: so macht Kühlen Spaß.

The tensiometers of the DCAT series are measuring instruments for force-based investigation of surface and interface properties. Because of the compact and modular product design of the DCAT series, a bespoke combination of device and accessories can be found for any use case. The DCAT 25SF single-fibre tensiometer contains a high-precision weighing system with a resolution of up to 0.1 μg. This enables measurements even on single carbon or glass fibres. Measurements can be carried out at defined humidity and at temperatures between -15 °C and 135 °C. In addition is it possible to investigate the viscoelasticity of monolayers. Furthermore, concentration series for determining the critical micelle concentration (CMC) can be automatically generated and measured. Measurements: - surface and interfacial tension - liquid density - dynamic contact angles - surface energy of solids - determination of the CMC - surface pressure - viscoelasticity of monolayers

Bis 90 Liter Inhalt und verschiedenen Temperaturbereichen zwischen -10°C und -85 °C

Bis 90 Liter Inhalt und verschiedenen Temperaturbereichen zwischen -10°C und -85 °C

Umlaufkühler für professionelle Anwendungen. Hochgenaue Kühlung für Prozesse und analytische Gerät. Der Umlaufkühler DLK 402: klein in seinen Dimensionen, großartig beim Kühlen. Merkmale: - Arbeitsbereich: -10°C bis +40°C - Kälteleistung: 380 Watt - Fördermenge: 4l/min - Förderhöhe: 1,5mWs - Elektronische Temperaturregelung mit LED-Anzeige - Schwimmerschalter zur Überwachung des Kühlmittelniveaus - Füllstandsanzeige an der Gerätevorderseite - Grenzwertalarm bei Überschreiten des erlaubten Arbeitsbereiches - Kälteaggregat: geräuscharm, vollhermetisch, luftgekühlt, wartungsarm - verschiedene Schlauchanschlüsse im Lieferumfang enthalten - 3/4“ Einfüllstutzen mit Entlüftungsventil auf der Geräteoberseite - Gehäuse aus PUR-Hartschaum - Wärmetauscher in Buntmetallausführung - stärkere Pumpe auf Anfrage erhältlich

Umlaufkühler für professionelle Anwendungen. Kühlung für Prozesse und analytische Geräte. Unsere Umlaufkühler bieten Ihnen Kühlung für Ihre Prozesse und Applikationen - mit mehr Leistung, höherer Temperaturkonstanz, größerer Energieeffizienz und so leise und kompakt, dass sich das Gerät problemlos direkt am Arbeitsplatz aufstellen lässt.

TANGO has exactly what users require of an FT-NIR spectrometer suitable for industrial use: robustness, high precision and straightforward operator guidance. • Proven FT-NIR technology by Bruker • Easy-to-use touch screen operation • Automated background management • Robust and precise optics • Direct calibration transfer to and from all Bruker Optics FT-NIR spectrometers Fast measurements for high sample throughput, simultaneous evaluation of different components and an intuitive handling, without need for expertise training: TANGO simplifies the NIR analysis and therefore offers maximum security of the results. It delivers reliable results wherever highest demands are made on raw materials as well as intermediate and finished products and a rapid measurement at low cost must be ensured.

COMBER Pressofiltro® Series PF 5 - PF 100 Pilot Plant Pressofiltro pilot units are multipurpose tools for pilot plant or laboratory applications as well as for small scale production facilities. Versatile use of the equipment, cGMP compliant design, containment, effcient and complete cleanability, complete dischargeability, highest drying effciency, process safety and monitoring, ease of validation and a compact design are important requirements. Special properties for the customer’s benefit: In compliance with cGMP and FDA guidelines, also available in steam sterilizable and/ or aseptic designs Small pilot units are skid mounted including all drives, the required instrumentation and the hydraulics For easy access larger pilot units are mounted on a support column or post; the vessel base is mounted on a separate column to lower the base and displace it to the side Vessel base can be designed interchangeable for conversion to a conical bottom dryer or a Nutsche filter dryer...

Wir bieten ein breites Spektrum an Messgeräten zur Erfassung von prozessbedingten Messgrößen (Temperaturen, Drücken, Zählerständen, ...). Messeinrichtung zur Erfassung des Absolutdrucks in einer Leitung. Der Anschluß wird mittels Schraub oder Schnellkupplung getätigt. Serienmßig mit integriertem Datenlogger und Funkschnittstelle ausgestattet. Die Druckmessung besitzt eine Genauigkeit von 0,1% FS Die Bereichswahl erfolgt nach Kundenspezification. Sonderausführungen sind möglich. Wir bieten ein breites Spektrum an Messgeräten zur Erfassung von prozessbedingten Messgrößen (Temperaturen, Drücken, Zählerständen, ...). Diese Geräte sind bereits seit vielen Jahren im Einsatz, und haben sich sowohl in der Benutzerfreundlichkeit, wie auch der Wartungsfreundlichkeit bewährt. Diese Geräte sind grundsätzlich mit Datenlogger und Funkschnittstelle ausgestattet.

Wir vertreiben zwei unterschiedliche Typen von Handmessgeräten der Firma PONSEL.